TV & Remote

How to Use Your Phone as a VIZIO TV Remote

Control a VIZIO SmartCast TV from an iPhone or Android phone, and keep it reachable when the TV is in standby.

3 min read · Updated November 18, 2026

Quick answer

Connect your phone to the same Wi-Fi as the VIZIO TV, open a remote app, pick the TV, and enter the 4-digit code shown on the TV screen.

Pair your phone

VIZIO's own app is VIZIO Mobile, which uses the same on-screen code.

  1. Turn on the VIZIO TV and make sure it is connected to Wi-Fi.
  2. Connect your phone to the same Wi-Fi network.
  3. Open a remote app and choose your VIZIO TV.
  4. Type the 4-digit code that appears on the TV.

Keep the TV reachable in standby

In Eco Mode the TV uses very little power in standby but may not respond to network commands until it is turned on. Quick Start keeps it ready, at the cost of higher standby power.

  1. Press Menu on the TV and open All Settings.
  2. Go to System > Power > Power Mode.
  3. Choose Quick Start instead of Eco Mode.

If the TV is not found

Make sure both devices show the same Wi-Fi name, not a guest network, and turn off any VPN on the phone. On iPhone, check Settings > Privacy & Security > Local Network for the app. Then restart the TV from its power menu and try again.

Common questions

Which VIZIO TVs work with a phone remote?

VIZIO SmartCast TVs that are connected to Wi-Fi. Very old VIZIO models without SmartCast may not support phone control.

Can my phone set up a new VIZIO TV?

Finish the TV's on-screen setup and Wi-Fi connection first. A remote app can only find a TV that is already online.

Learn more